| 钢丝绳报废的15条标准 |
| 添加时间：2018/9/6 17:11:28 浏览次数： |
| 1.缺陷：钢丝挤出 处理：立即报废 1. defect: steel wire extrusion: Scrap immediately. 2.缺陷：单股钢丝绳 绳芯挤出 处理：立即报废 2. defect: single strand wire rope core extrusion process: Scrap immediately 3.缺陷：绳股凹陷、绳直 径局部减少 处理：检查或降低载荷4.缺陷：绳股挤出/扭曲 处理：立即报废5.缺陷：局部压扁 处理：立即报废 3. Defects: strand depression, rope diameter local reduction treatment: check or reduce load 4. Defects: strand extrusion / twist treatment: scrap immediately 5. Defects: local flattening treatment: scrap immediately 6.缺陷：纽结（正向） 处理：立即报废 6. defect: knots (forward) processing: immediate discarding 7.缺陷：纽结（逆向） 处理：立即报废 7. defect: knots (reverse) processing: immediate discarding 8.缺陷：绳股挤出/扭曲 处理：检查、降低载荷、严重报废9.缺陷：笼状畸变 处理：立即报废 8. Defects: Extrusion/twisting treatment of strands: inspection, load reduction, serious scrap 9. Defects: cage distortion treatment: scrap immediately 10.缺陷：外部磨损处理：润滑、观察 10. defects: external wear treatment: lubrication and observation 11.缺陷：绳股凹陷、绳 处理：立即报废 11. defects: rope strand depression, rope treatment: immediately scrapped 12.缺陷：表面断丝 处理：一捻距内2处 断丝或10％断丝报废 12. defects: surface breaking treatment: 2 broken wires or 10% broken wires within one distance. 13.缺陷：内部绳股突出 处理：立即报废14.缺陷：局部直径变大 处理：增大5％，立即 报废15.缺陷：局部压扁处理：立即报废 13. Defects: internal strand protrusion: scrap immediately 14. Defects: local diameter enlargement treatment: increase by 5%, scrap immediately 15. Defects: local flattening treatment: scrap immediately |
| 上一页 链条索具概述 |
| 下一页 【索具使用】注意事项 |
Copyright © 技术支持：遨游网络