| 【索具使用】注意事项 |
| 添加时间：2018/8/30 17:41:00 浏览次数： |
| 1、每一个索具在每一次使用前必须要检查 1. Every rigging must be checked before each use. 2、不要让索具打结 2. Do not tie rigging. 3、避免强夺或震荡负载，避免偏心载荷 3, avoid taking or swallowing loads to avoid eccentric loads. 4、当移动索具的时候，不要拖拉它 4, do not drag it when dragging rigging. 5、作业前，检查所用索具型号是否匹配，链接处是否牢固、可靠 5, before the operation, check whether the rigging models are matched, and whether the links are reliable and reliable. 6、起吊过程中不允许有较大的冲击与碰撞 6. No larger impact or collision is allowed during lifting. 7、在吊装时，不要扭、绞索具 7. Do not twist or twist when lifting. 8、避免在索具提升时，钢丝绳与卸扣发生摩擦，造成横销转动，导致横销与扣体脱离 8. Avoid the friction between the wire rope and the unloading button when the rope is lifted, causing the transverse pin to rotate, causing the transverse pin to break away from the fastener. 9、根据使用的频度、工况条件恶劣成都应确定合理的定期检查，定期检查周期不应低于半年，最长不超过一年，并做检查记录 9. Chengdu should confirm the reasonable periodic inspection according to the frequency of use and the bad working conditions. The periodic inspection period should not be less than half a year, and the longest should not exceed one year. Chengdu should make the inspection record. |
| 上一页 钢丝绳报废的15条标准 |
| 下一页 钢丝绳索具报废标准 |
Copyright © 技术支持：遨游网络