| 固定索具 |
| 添加时间：2019/12/31 14:31:33 浏览次数： |
| 固定锁具、侧支索和前后曳支索通常由镀锌钢或不锈钢制成，几平无须保养。但要检查是否存在断丝或可疑部件，并按要求更换。通过链盘、 部双向开关配件和一部可调式隐藏螺栓，将索具的～端固定于船体或甲板上。另一端用特殊的船桅配件固定在船桅上。隐藏螺栓的螺纹必须施以润滑油，并用扎捆钢丝或夹子“包裹”，以防松动。 The fixed locks, side cables and front and rear traction cables are usually made of galvanized steel or stainless steel, which need no maintenance. However, check whether there are broken wires or suspicious parts, and replace them as required. The ~ end of the rigging is fixed on the hull or deck through the chain disk, two-way switch accessories and an adjustable hidden bolt. The other end is fixed to the mast with special mast accessories. The threads of hidden bolts must be lubricated and "wrapped" with tie wires or clamps to prevent loosening. 检查所有开口销、开口环、螺母、螺栓和马蹄钳栓是否磨损；如果磨损或丢失就需更换。如果存在疑问，就请专业的索具装配工来检查索具。阅读保险单里的附属细则；情况可能是每l 0年需更换一次固定索具。 Check all cotter pins, split rings, nuts, bolts, and horseshoe bolts for wear; replace if worn or missing. If in doubt, ask a professional rigger to check the rigging. Read the attached details in the insurance policy; it may be necessary to replace the fixed rigging every 10 years. |
| 上一页 双扣柔性吊装带优点 |
| 下一页 两种因素直接关乎起重吊装的安全性 |
Copyright © 技术支持：遨游网络