返回首页

河北吊索具生产厂-钢丝绳吊索具,柔性吊装带

本站导航

新闻动态

当前位置:网站首页 > 新闻动态 > 详细信息
怎样减轻链条索具的磨损程度
添加时间:2017/10/11 14:31:37     浏览次数:
链条索具主要以金属链环链接而成的吊索具,随着使用年限的增长以及次数的频繁,链条磨损程度而越来越严重,磨损到某种程度后则需要宣布报废。
The chain slings are mainly made of metal chain links. With the increase of service life and frequent frequency, the wear of chains is becoming more and more serious. After wearing to some extent, they need to be declared scrapped.
1、链条松紧度应当适宜,不应过松或者过紧,太紧容易增加功率消耗,轴承易磨损,太松则容易跳链。
1, the chain tightness should be appropriate, should not be too loose or too tight, too tight, easy to increase power consumption, bearings easy to wear, too loose, easy to skip the chain.
2、新链条不能于旧链条混合使用,以免在使用中拉断链条。
2, the new chain can not be used in combination with the old chain, so as not to break the chain in use.
3、使用中应适当加注润滑油,提高工作效率,降低磨损程度。
3, the use of appropriate lubrication should be added to improve efficiency and reduce wear.
4、条应根据起重物的提升高度调节链条长度,不允许超载使用。
4. The length of the chain shall be adjusted according to the lifting height of the lifting load, and overload shall not be used.
上一页  链条索具如何减少磨损  
下一页  链条索具注意事项
  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品分类1
  • 产品分类2
  • 产品分类3

Copyright © 技术支持:遨游网络

  • 联系我们
  • 网上订单
  • 工程案例
  • 本站导航

搜索

  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品分类1
  • 产品分类2
  • 产品分类3