(1)检查的方法：将两个尺寸合适的夹钳相隔100-200毫米夹在钢丝绳上反方向转动，股绳便会脱起。操作时，必须十分仔细，以避免股绳被过度移位造成永久变形，导致钢丝绳结构破坏。

(1) inspection method: two suitable size clamps 100-200 millimeters apart, clamps on the steel rope to turn in the opposite direction, the rope will take off. The operation must be done with great care to avoid the excessive displacement of the strands, resulting in permanent deformation, resulting in structural damage to the wire rope.

(2)检查的内容：小缝隙出现后，用起子之类的探针拨动股绳并把妨碍视线的油脂或其它异物拨开，对内部润滑、钢丝锈蚀、钢丝及钢丝间相互运动产生的磨痕等情况进行仔细检查。特别应该注意到，检查断丝，一定要认真，因为钢丝断头一般不会翘起而不容易被发现。

(2) check the contents: small cracks appeared, with a screwdriver like probe rope and to obstruct the view of oil or other foreign bodies off, grinding etc. to each other within the movement of lubrication, corrosion of the steel wire, steel wire and wire have carefully examined. In particular, it should be noted that the inspection of broken wire must be serious, because the steel wire breakage generally does not tilt, but not easy to find.

(3)检查完毕后，稍用力转回夹钳，以使股绳完全恢复到原来位置。如果上述过程操作正确，钢丝绳不会变形。

(3) after checking, return the clamps to the clamps slightly so that the rope is fully restored to its original position. If the above procedure is correct, the wire rope will not deform.

对钢丝绳索具进行内部检查要比进行外部检查困难的多，但由于内部损坏（主要由锈蚀和疲劳引起的断丝）隐蔽性更大。所以，为保证钢丝绳索具的安全使用，浦泰建议大家必须对钢丝绳索具进行详细的内部检查。

Internal inspections of wire ropes are much more difficult than conducting external inspections, but are more subtle because of internal damage (mainly due to corrosion and fatigue). Therefore, in order to ensure the safe use of wire ropes, Pu Gang suggested that you must carry out detailed internal inspection of wire ropes.